Lilyjet Pond Sweep View Larger Image The Lilyjet Pond Sweep is an excellent aid for keeping your pond attractive. Simple and effective to use, it operates with your garden hose, forming a “vacuum” to remove the normal silt, sediment, algae and decaying matter that collects on the bottom of your pond or fountain. You can easily remove this algae-inducing bottom matter without emptying the pond or undertaking a major cleaning job. No electricity or motors are needed to operate the sweep. The sweeps come with complete instructions and 12-feet of exhaust tubing. With water on full move sweep head forward along bottom of pond 12" then up 2". Repeat motion for best results. The Pond Sweep head dimensions are: 7" x 2". S133 - Mini - $89.99  Quantity: S134 - Maxi - $96.99  Quantity:

Pump Strainers

View Larger Image Pump strainers should be installed on the inlet of all submersible pumps. They will protect your pump from drawing any debris in that may harm or clog the pump operation. They are not required if pump is in operation with Biological Filter. Strainers screw onto inlet of pump. Specify proper code for thread size. Two-piece plastic construction screws apart to clean. 3" diameter. S385 - Same strainer, 3 3/4" diameter - $21.99  Quantity:

PVC Tubing

View Larger Image This flex tubing is made of strong PVC and can be glued with normal PVC fittings and glues. PVC flex tubing is preferred since each 90 degree added to rigid PVC can reduce the water flow by as much as 10 % cutting your flow of water to your waterfall or pond return. Very strong and will handle the pressure of a 2 or 3 horse power pump and filter. Normal use is with the Whisperflo pumps and the Tagalus filters however is may be used with any pump and filter that required 1 1/2 inch or 2 inch tubing. H178 - 1 1/2 inch tubing - per foot - $2.25  Quantity: H676 - 2 inch tubing - per foot - $2.85  Quantity:

Submersible Cal Pumps

View Larger Image All Cal pumps have stainless steel shafts which assure trouble-free service and double seals at motor shaft. Pump housing and impellers are nylon for corrosion-free service. Runs very quietly. Models No. A210T through No. A430T are constructed of high silicate content aluminum, cast in precision dies for uniform quality. Models No. S320T through No. S1200T are constructed of brass and stainless steel. All Cal pumps come with a control valve. Models No. A210T through No. S1200T are furnished with a six foot, twelve or twenty foot heavy-duty three-wire ground type service cord; neoprene, oil and waterproof. Underwriters Laboratory approved. Each A-model has a twelve-month manufacturer’s warranty and each S-model a 24 month manufacturer’s warranty. These pumps operate equally well in any position. Inlet must be under water. For Purchasing Information Click Here to see the Submersible Cal Pumps Chart

Whisperflo™ High Performance Exterior Pump

View Larger Image The newest, highest quality UL listed pump on the market. Its durable high temperature Noryl™ Thermoplastic can withstand extreme heat and corrosion. Whisper-flo™ is designed for long life and is backed up by a 2-year manufacturer's warrnty. It moves more water in less time using less energy and creating less noise than anny other pump operating within the normal range of 35-80 feet of head. Whisper-flo™ is available with standard 2" inlet and outlet making plumbing connections a cinch. Whisperflo™ operates at 220 volts and is compatible with our Sand Filter. S545F - 3/4 H.P. Whisperflo Pump (6,000 GPH) - $625.99  Quantity: S546F - 1 H.P. Whisperflo Pump (6,900 GPH) - $685.99  Quantity: S547F - 2 H.P. Whisperflo Pump (8,000 GPH) - $799.99  Quantity:

Back to the Pond Building Products Section Index

Top

2460 North Euclid Avenue Upland, California 91784-1199
Hours: Open Tuesday thru Saturday 9:00 - 4:30
Closed Sundays and Mondays Call for Winter Hours
Orders and faxes can be received after hours
Toll FREE: 800-205-2425 - FAX: 909-949-7217
Copyright © 2008 American Water Gardens, Inc.